Fiber Optic Trees

Warning! Never perform maintance on a tree that is plugged in!

Follow these step-by-step instructions to learn how to assemble your fiber optic tree. You will also learn how to change a bulb. Never work with the tree when it is on.

Click on the thumbnail image for a larger view.


Step 1.
Find a flat surface on which to set up your tree. Never allow any material to block the vents on the bottom of the base. click to enlarge
 





Step 2.
Insert the tree into the plastic base. click to enlarge
 




Step 3
.
Shape the tree. Never work with the power on. click to enlarge
 

 


Step 4
.
Plug in the tree with the cord provided in your package. click to enlarge
 

 

 



Step 5.

Plug one end into the base and the other into the wall outlet. click to enlarge
 



Step 6.

Turn on the tree using the on off switch on the base. click to enlarge
 





Step 7.

Fiber optic trees change colors gradually. If your tree does not light up after following the above steps, check the bulb. It may be loose or broken. click to enlarge
 



Step 8
.
Remove the plastic cover by turning the base upside down and unscrewing the screws.
click to enlarge

 



Step 9
.
Remove the color wheel by taking off the bolt and lifting the wheel off. click to enlarge
 

 


Step 10.

Unscrew the protective ring that is holding the bulb into place. click to enlarge
 

 




Step 11.

Lift off the ring. click to enlarge
 




 
Step 12.
The bulb is seated in the base. First try adjusting the bulb. It may just be loose. click to enlarge
 

 


Step 13.

If the bulb is damaged or burnt out, remove it and replace it with the replacement bulb supplied at the time of purchase. click to enlarge
 

 


Step 14.
Replace the base cover and tighten with screws. click to enlarge
 

 


 

Step 15.
Test the base by turning it on and looking into the base for the light. click to enlarge
 

 


Home | Help Center | Decorating | Contact Us